For a belt-type bucket elevator, a hot-vulcanized stepped splice is the only joint worth treating as permanent. A splice is the joint that turns two belt ends into one endless lo...
READ MOREThe company manufactures acidification kiln coolers with diameters ranging from 1 to 5.5 meters, suitable for cooling materials after the acidification and roasting of lithium concentrate for lithium battery new materials.
Application
Used for cooling materials after the acidification and roasting of lithium concentrate for lithium battery new materials.
Product Description
The company manufactures acidification kiln coolers with diameters ranging from 1 to 5.5 meters, suitable for cooling materials after the acidification and roasting of lithium concentrate for lithium battery new materials.
Highlights
● Acidification kilns can be designed in various configurations to meet customer needs and operating requirements.
● The cylinder design of the lithium concentrate acidification cooling kiln fully considers the rotation angle of the cylinder's deflection support, extending the life of the refractory bricks and castings.
● The lithium concentrate acidification cooling kiln utilizes large-diameter, low-aspect-ratio roller bearings for improved reliability. The bearings are self-aligning.
● A spring-laminated flexible seal with a double-layer spring seal provides an additional insulation layer, helping to improve the reliability and service life of the lithium concentrate acidification cooling kiln.
Operating Principle
Depending on the material properties, two cooling methods can be used: shell-and-tube coolers and water bath coolers. The water bath type can be further divided into two types: sleeve-type water baths and open-type coolers. Our company can provide customized production based on specific operating conditions and technical requirements.
For a belt-type bucket elevator, a hot-vulcanized stepped splice is the only joint worth treating as permanent. A splice is the joint that turns two belt ends into one endless lo...
READ MOREA bucket elevator belt replacement is a planned shutdown job, not an emergency repair, and it runs fastest when the crew treats it as four separate tasks: isolate the machine, re...
READ MOREThe three main bucket elevator belt joint types are mechanical clamp joints, vulcanized splices (hot or cold), and finger or lap joints for synthetic belts. For most heavy-duty r...
READ MOREBucket elevator bearings are the most common reason for unscheduled stops in a bucket elevator, and the real cause behind most early failures is contamination or lubrication loss...
READ MORE