News- Nantong Alisen Environmental Protection Technology Co., Ltd.

Industry News

Bucket Elevator Belt Splice: Methods, Tolerances, and Inspection Checks

Oct 12, 2026

For a belt-type bucket elevator, a hot-vulcanized stepped splice is the only joint worth treating as permanent. A splice is the joint that turns two belt ends into one endless loop, and in an elevat...
Industry News

A Bucket Elevator Belt Replacement Procedure: Step-by-Step Guide for Plant Crews

Oct 10, 2026

A bucket elevator belt replacement is a planned shutdown job, not an emergency repair, and it runs fastest when the crew treats it as four separate tasks: isolate the machine, remove the old belt, p...
Industry News

Bucket Elevator Belt Joint Types: How to Choose the Right Splicing Method

Sep 28, 2026

The three main bucket elevator belt joint types are mechanical clamp joints, vulcanized splices (hot or cold), and finger or lap joints for synthetic belts. For most heavy-duty rubber elevator belts...
Industry News

Bucket Elevator Bearings: Selection, Failure Prevention and Maintenance Guide

Sep 22, 2026

Bucket elevator bearings are the most common reason for unscheduled stops in a bucket elevator, and the real cause behind most early failures is contamination or lubrication loss, not the bearing it...
Industry News

Bucket Elevator Backstop: Functions, Working Principles, and Selection

Sep 14, 2026

A loaded bucket elevator does not stop when the drive fails. It reverses. The weight of filled buckets on the downward side pulls the belt or chain backward, and within seconds the boot fills with s...
Industry News

Basic Composition of Industrial Dust Collector: The 5 Key Components Explained

Sep 11, 2026

An industrial dust collector is a powered filtration system built from five basic components: capture hoods and ductwork, a fan or blower, filter media, a filter cleaning mechanism, and a discharge ...
Industry News

Belt Bucket Elevator Design: Centrifugal vs Continuous and Belt vs Chain

Sep 04, 2026

What Is a Belt Bucket Elevator? A belt bucket elevator is a vertical material handling machine that moves bulk solids using buckets bolted to a belt. The core design goal is to match the discharge m...
Industry News

Bucket Elevator Alignment: Causes, Warning Signs, and Step-by-Step Fixes

Aug 24, 2026

Bucket elevator alignment is the single most overlooked factor in reliable vertical conveying. When the casing, head, and boot are not straight, the belt or chain drifts, buckets scrape the trunk, a...
Industry News

Bucket Elevator Alignment Procedure: Step-by-Step Guide for Belt & Chain Units

Aug 20, 2026

A bucket elevator alignment procedure is a sequence of checks that places the casing, the head and boot shafts, the pulleys or sprockets, and the belt or chain on a common vertical and horizontal re...
Industry News

Bucket Elevator Data Sheet: How to Read Specs and Select the Right Model

Aug 13, 2026

A bucket elevator data sheet is the most compact and reliable way to verify whether a lift will actually work for your bulk material. It converts the variables that define safe operation—capacity, b...
Industry News

Bucket Elevator Buckets: A Practical Selection & Replacement Guide

Aug 06, 2026

You notice a drop in your line's throughput. The boot section of your elevator sounds different—a grinding noise that wasn't there last month. When you shut down for inspection, several buckets are c...
Industry News

Electrostatic Precipitator vs Dust Collector: 2026 Workshop Dust Control Guide

Jul 29, 2026

The most effective long-term solution for capturing submicron particulate matter in high-volume industrial operations remains the electrostatic precipitator, a technology that has undergone significa...