The agitator granulator is a new type of organic fertilizer granulation equipment, designed and manufactured using a new wet continuous push rod granulation process. It utilizes the high-speed mechanical agitation force and the resulting air dynamics to continuously mix, granulate, spheroidize, and densify the material within the granulator chamber. The material is evenly fed into the granulator chamber by a feeder, where it is agitated and pre-pressed by the agitator to form granules. It can granulate a variety of organic fertilizers, including raw materials such as livestock and poultry manure, composted manure, green manure, sea manure, cake fertilizer, peat, and other organic fermented fertilizers from municipal waste. It is suitable for light, fine powder materials such as chicken manure, pig manure, cow dung, charcoal, clay, and kaolin.
The agitator granulator's housing is constructed of thickened seamless steel pipe, making it durable, non-deformable, and stable in operation. During operation, material enters the machine through a feed port at one end. The granulating rotor continuously pushes the material, creating granules through mechanical motion with the housing. The finished granules are then ejected from the other end. The machine boasts a sturdy structure, stable operation, and easy installation with minimal wearing parts, making it easy to maintain and suitable for small and medium-sized enterprises.
The agitator granulator can process wet materials with a moisture content of 20%-30% without the need for additional drying or pulverization. Adjusting the speed, time, and screen aperture can meet the needs of various application scenarios, resulting in granules with excellent sphericity and high strength. Compared to traditional granulation equipment, this machine offers lower operating costs and is suitable for small and medium-sized production lines. Its enclosed agitation chamber design reduces dust and noise pollution, allowing it to process a wide range of materials with a wide range of moisture content and viscosity. It represents a new era of environmentally friendly fertilizer production equipment.
Rotary Drum Granulator
Double-Roller Extrusion Granulator
Drum Granulator
Pan Granulator
For a belt-type bucket elevator, a hot-vulcanized stepped splice is the only joint worth treating as permanent. A splice is the joint that turns two belt ends into one endless lo...
READ MOREA bucket elevator belt replacement is a planned shutdown job, not an emergency repair, and it runs fastest when the crew treats it as four separate tasks: isolate the machine, re...
READ MOREThe three main bucket elevator belt joint types are mechanical clamp joints, vulcanized splices (hot or cold), and finger or lap joints for synthetic belts. For most heavy-duty r...
READ MOREBucket elevator bearings are the most common reason for unscheduled stops in a bucket elevator, and the real cause behind most early failures is contamination or lubrication loss...
READ MORE
En
English 
Français 
русский 
中文简体 
عربى 
Español 
