In industries such as building materials, mining, and expanded clay, raw materials like clay contain hard impurities like stones, which hinder subsequent processing. Therefore, large stones need to be removed from the clay. A stone remover is a device that removes these stones from the clay.
Applications
Building Materials, Mining, and Expanded Ceramic
Product Introduction
Material falls into the stone remover through the inlet on the hood. It passes through the gap between the smooth roller and the spiral roller, where it is squeezed and released into a strip-like shape into the subsequent material collection device on the production line. However, the hard stones cannot be squeezed through and are discharged from the sides along the grooves on the spiral roller as it rotates, thus removing the stones from the clay. The clay stone remover features a simple structure, reliable performance, and easy maintenance.
Key Advantages
● Simple structure, reliable performance, and easy maintenance
● Highly efficient equipment for separating rocks from raw materials such as clay
● The two rollers of the double-roller stone remover rotate at high speeds and at a differential speed, ensuring smoother material discharge and preventing material from sticking to the rollers
● Slotted holes in the bearing seat allow the bearing seat to move left and right, adjusting the gap between the two rollers to adjust the particle size for removing large rocks
Operating Principle
Material falls into the stone remover through the inlet on the hood. It passes through the gap between the rollers and the spiral rollers, where it is squeezed and formed into a ribbon and delivered to the subsequent collection device on the production line. The hard rocks cannot be squeezed through and are discharged from the sides along the grooves on the spiral rollers as they rotate, thus removing the rocks from the clay. The clay stone remover features a simple structure, reliable performance, and easy maintenance.
Twin-Shaft Mixer
Compound Fertilizer Twin-Shaft Mixer
Double-Roller Extrusion Granulator
Hammer-Roller Crusher
Vertical Roller Mill
Double-Roller Crusher
For a belt-type bucket elevator, a hot-vulcanized stepped splice is the only joint worth treating as permanent. A splice is the joint that turns two belt ends into one endless lo...
READ MOREA bucket elevator belt replacement is a planned shutdown job, not an emergency repair, and it runs fastest when the crew treats it as four separate tasks: isolate the machine, re...
READ MOREThe three main bucket elevator belt joint types are mechanical clamp joints, vulcanized splices (hot or cold), and finger or lap joints for synthetic belts. For most heavy-duty r...
READ MOREBucket elevator bearings are the most common reason for unscheduled stops in a bucket elevator, and the real cause behind most early failures is contamination or lubrication loss...
READ MORE
En
English 
Français 
русский 
中文简体 
عربى 
Español 
